More than 10 years slurry pump and parts manufacture experience
1. Slurry pump parts
Completely interchangeable with slurry pumps and gravel pumps
For unlisted slurry pump parts, OEM service offered---Drawings
- Metal Liner
- Rubber Liner
- Bearing Assembly
- Pump Volute;
- Cover Plate & Frame Plate
High chrome alloy: A05, A07, A33, A49, etc.
Natural rubber: R08, R26, R33, R55, etc.
Other material as per requests, like stainless steel, duplex
stainless steel, Nickle alloy, Alloy 20, etc.
Bearing assembly – a large diameter shaft with short overhang minimizes deflection
and contributes to long bearing life. Only four through bolts are
required to hold the cartridge type housing in the frame.
Liners – easily replaceable liners are bolted, not glued, to the casing
for positive attachment and east of maintenance. Hard metal liners
are completely interchangeable with pressure molded elastomeric.
Elastomeric seal rings back all liner joints.
The cover plate is produced using elastomer or hard metal,
such as natural rubber, high - chromium alloy, etc.
It has various sizes and styles, and the installation is very easy.
Additionally, OEM design is accepted. This product is also named as
slurry pump liner, and it is also an overflow component. It can
form a pump chamber with throat bush and frame plate liner insert.
Meanwhile, it is white iron with high-chromium alloy whose content
as much as 27%, and it shows good resistance to abrasion
Casing – Casing halves of cast or ductile iron with external reinforcing
ribs provide high operating pressure capabilities and an extra
measure of safety.
Impeller – front and rear shrouds have pump out vanes that reduce
recirculation and seal contamination. Hard metal and molded
elastomeric impellers are completely interchangeable. Cast in
impeller threads require no inserts or nuts. High efficiency and
high head designs are also available.
Throat bush – wear is reduced and maintenance simplified by the use of tapered
mating faces to allow positive accurate alignment during assembly
and simple removal.
One-piece frame – a very robust one-piece frame cradles the cartridge type bearing
and shaft assembly. An external impeller adjustment mechanism is
provided below the bearing housing for easy adjustment of impeller
- OEM Service
We also provide OEM service according to customer's any special
- Processing Service
- Can manufacture parts according to your drawings.
- Materials as follows:
1. High Chrome concentration alloy 1, Rockwell hardness HRC ≥60,
high abrasion application.
2. High Chrome concentration alloy 2, Rockwell hardness HRC ≥58,
high abrasion application .