Wear Resistant submersible Slurry Mud Pump parts for dredging
machine, mining submersible pump
Anti-acid Centrifugal Slurry Pump Parts
1. Outlet: 25mm - 750mm
2. Solid diameter: 1mm - 400mm
3. Motor power: 2.2kw - 2500kw
4. Head: 1m - 100m
5. Capacity: 5 -15000 m3/h
6. Density: 10% - 80%
7. Material: M/MR/MMR
8. Duty: Heavy
9. Wet Parts Material: High-chrome alloy; highly wear-resistant
10. Application: Mining and mineral processing in non-ferrous and
1. Bearing assembly: large diameter shaft with short overhang
contributes to long bearing life.
2. Liners: Easily replaceable liners are bolted, not glued to the
casing for positive maintenance.
3. Casing: Casing halves of cast or ductile iron provides high
operating pressure capabilities.
4. Impeller: Front and rear shrouds have pump out vanes that reduce
recirculation and seal contamination.
5. Throat bush: Wear is reduced and maintenance simplified by the
use of tapered.
Slurry pump parts--packing (pump seal)
The sealing method contains packing seal, centrifugal seal and
mechanical seal. The packing is usually used for packing seal and
centrifugal seal, and our product has different models .Clients are
recommended to buy two boxes of packing at one time which are
sufficient for one pump
Slurry pump spare pats-Volute liner
This is volute liner for slurry pump with excellent wear
resistance, corrosion resistance and large passage area.
Good casing design makes maintenance easily and cost much lower.
Advanced heat treat technology is used to treat high chrome alloy
and results with a compact micro-structure and a high quality
Slurry pump parts-bearing assembly
Bearing assembly uses cylindrical structure, adjusting the space
between impeller & front liner easily, being removed completely
when being repaired.
Submersible slurry pump:
Submersible slurry pumps are a durable,electro-submersible slurry pumps,Versatile and
rugged solution for the transfer of abrasive and high density
slurries in mining,civil construction,industry and other heavy duty
Features of submersible slurry pump:
1, Large cut water clearance: The pump casing features a large cut
water clearance which allows the easy passage of large solids and
reduces wear and erosion to improve service life and prevent loss
2, Integral agitator: The 27% chrome white iron agitator assists in
the pumping of slurries by breaking up large particles and
agitating high concentrations of solids.
3, F class motor insulation
4, Support frame and strainer
5, Double mechanical seal
6, Oil chamber leakage probe
7, Optional external cooling
Performance ranges of submersible slurry pump:
|Discharge Sizes:||80mm - 400mm|
|Flow rates:||23t o 2400 m3/h|
|Head:||up to 64m|
|Solids diameter:||up to 60mm(2.4 inches)|
|Material:||27% chrome white iron|
Submersible slurry pump Use Conditions:
1. The power source is 50Hz/380V,60hz,415v,220v,3 phases(If the
voltage have special requirements, please inform in advance)
2.The temperature of the medium cannot exceed 60°C, and it does not
contain inflammable or explosive gases.If the tempreture is
higher,we can add pressured cooling system.
3.The maximum weight concentration of the ash is 30% and maximum
weight concentration of the slag is 60%.
4.Maximum submerged depth under the water is 20 meters, the minimum
submerged depth takes submerging of the motor as reference.
5.Working status in the medium is vertically and continuou